Hello everyone,
A few weeks ago I got it in my head to build a quadcopter myself.
So it started, first 3D printing the "base frame" and then attaching and soldering Esc , FC , Cam and motors. So far so good. Only then came the part with the remote control receiver. As a remote control, I bought a FlySky FS-i6, supposedly suitable for quadcopters. But I can't get any further here... the receiver has 3-way plug-in connections for Channel1-6.
Now which wire is SBUS, GND and 5V?
It would be really great if someone could help here!
Thank you in advance!
A few weeks ago I got it in my head to build a quadcopter myself.
So it started, first 3D printing the "base frame" and then attaching and soldering Esc , FC , Cam and motors. So far so good. Only then came the part with the remote control receiver. As a remote control, I bought a FlySky FS-i6, supposedly suitable for quadcopters. But I can't get any further here... the receiver has 3-way plug-in connections for Channel1-6.
Now which wire is SBUS, GND and 5V?
It would be really great if someone could help here!
Thank you in advance!
